|
D051/16H/21H/26H |
Hardened Friction Lock Baton with Belt Holder
These hardened batons have expandable tubes, which are made from a more superior material,
which is hardened by heat treatment. Three types of handles are available - anti-slip handle
with indented - rough surface of the type "H" or gentler surface of the type "HT" (this
design expressively decreases any possibility of the baton being yanked from the hand and
gives the user a comfortable grip) or ergonomic handle of the type "HE" with pleasant smooth
surface. The batons are highly resistant vibration if the baton is exposed to a hard strike.
They meet the requirements of the German standard for expandable batons and are intended for
professional use by police and other authorities. Surface finish is black nickel-zinc (with
good resistance to abrasion), or white chrome.
|
 |
D280/16/21/24/26 |
CAMLOCK Baton with End Ring & Holder
The Camlock baton offers substantial benefits over other batons for deployment,
effectiveness and comfort. The baton can either be pulled out or it opens with a flick of
the wrist. It is closed by pushing together the 3 parts after pressing the button on the end
of the handle. It has a synthetic grip material and rubber parts between the single baton
parts are shock absorbing. No grinding noise or clattering. 100 percent lock out 100 percent
of the time. Fully guaranteedFull accessories security grip endings and tips and holders are
also available.
|
 |
D153 |
Disposable Textile Handcuffs
High strength disposable nylon cuffs. Training in red that can be re-used. Black for covert
and yellow for high visibility.
A lightweight cutter is available that easily cuts through nylon/plastic cuffs, seat belts
and other material.
|
 |
D080A |
Round Shield 600mm
Manufactured in clear polycarbonate, with a spring clip, polyurethane moulded arm guard and
moulded 'D' handle.At all fixing holes, metal to polycarbonate contact is prevented by the
use of plastic inserts thus reducing the risk of cracking from induced stress.
|
 |
D078 |
Long Interlocking Public Order Shield 1800mm x 570mm x 4mm
This Shield fully interlocks offering maximum protection not only from frontal attack but
side and overhead assault. The Shield offers excellent protection for specialist tasks such
as baton/gas gunners, surveillance photographers and forward commanders.
|
 |
D079 |
Intermediate Interlocking Public Order Shield 1200mm x 570mm x 4mm
The measurements for this shield are 1200mm long x 570mm wide x 4mm thick. Several handle
configurations are available for this shield. Shown here is the standard Police handles but
we can also offer the large 'D' handle version suitable for control and restraint operations
in prisons for example. Please enquire for more details
|
 |
D168 |
Square Commanders Shield 560mm x 570mm x 4mm
Ideally suited for rapid response intervention tactics by being designed to survive
extensive impact from thrown objects and edged weapons.The shape is also an ideal
replacement for the traditional round shield, particularly when operating in confined or
enclosed areas where a square will combine with the structure to provide maximum
protection.This shield is fully interlocking and manufactured to the same high standards.
With two lightweight aluminium lop handles with non-slip rubber grips for secure handgrip in
action and a moulded lip at the bottom to enable vertical stacking.
|
 |
D031 |
Level 5 Slash resistant public order glove
The Deenside Slash Resistant Glove is designed to offer the ultimate in protection and
comfort. Our glove is made to withstand the toughest conditions faced by Police and Prison
Officers.The outer shell is made from revolutionary PYROHIDE (r) grain leather. Internal
high impact resistant closed cell foam padding is located across the back of the hand and
along each finger and thumb. The palm is protected by a self-leather overlay full palm and
finger patches, which also help to extend the life of the product.The elasticised wrist
ensures a tight fitting closure.
|
 |
D032 |
FR Undergloves
This glove is flame retardant and is made of lightweight blended material.This navy glove is to be worn under a standard issue or protective leather glove.
|
 |
D033 |
Fingerless FR Undergloves
This glove is flame retardant and made of lightweight blended material.This navy glove is to be worn under standard issue or protective leather gloves.
|
 |
D084/T/B |
FR Underwear Tops and Bottoms
Produced from 100% Protex and navy in colour, Deenside underwear is designed to provide an
additional layer of protection and security to the wearer.Ideal for use in warm weather, the
material can be dry cleaned, hand or machine-washed.Available as a set or individually as
long johns and crew necked long sleeve t-shirt and stocked in sizes S, M, L and XL.
|
 |
D038 |
FR Headover
This headover is similar to the half-hood headover, except that it offers the traditional
full-hood balaclava style.Ideal for use in warm weather, the material can be dry cleaned,
hand or machine-washed.
|
 |
D039 |
FR Half Headover
This headover is a half facemask and is designed in such a way so that it can be pulled over
the head and left ready for use around the neck, acting as a scarf. When necessary, it can
be fitted rapidly back onto the face should the incident require the protection.Ideal for
use in warm weather, the material can be dry cleaned, hand or machine-washed.
|
 |
D085 |
CAST Approved FR PSU/HMP Suit
Men's and ladies tailored suits manufactured from lightweight material. These are
specifically designed for use by Police and Prison Officers when dealing with instances of
serious disorder. These suits have a two-way metal zip. The collar can be closed by tab and
Velcro, access through openings on side seams closed by Velcro . Elasticated around the
ankles and wrists, also across the back waist. Fully CAST certified. Please note this suit
must be worn with FR underwear to maintain the correct level of protection
|
 |
D362 |
ARGUS Public Order helmet
**EXCLUSIVE TO DEENSIDE AS SOLE DISTRIBUTOR**
The Argus APH05 is a robust, safe and reliable helmet that has been manufactured and tested
to meet recognised standards. It has been specifically designed for the rigorous operational
requirements of public order and security duties.
|
 |
D211 |
ER1 Rescue Helmet (Also Torch & Bracket and Ear Defenders)
The helmet and visor provides protection to the head and eyes from hazards experienced
during emergency and rescue duties. The ER1 is a close
fitting helmet with integral visor which is suitable for nonstructural fire-fighting
operations such as road traffic accidents, bush fire, USAR, water and height rescue, civil
defence and confined space inspections.
|
 |
D171 |
Folding Baseball Cap
Folding Baseball Cap with carrying pouch
Professional appearance
Central seam on visor allows folding for easy storage
Embroidered logo bespoke to requirements
With or without chequered strip
|
 |
D100 |
Lightweight vest in ABS
The Deenside Lightweight Vest has been developed to provide protection against axes,
machetes, projectiles, darts, batons bricks and hypodermic needles.Constructed from
lightweight ABS plastic with foam backing for added comfort. The vest is fitted across the
shoulders and around the waist by 2" (50mm) nylon webbing straps and is fastened with Velcro
TM, allowing for considerable adjustability to fit a range of sizes.
|
 |
D269 |
Shoulder & Upper Arm Guard
This product is designed to provide protection without impeding free movement of the body
against the risk of injury that could be caused by missiles thrown or skated, strikes by
batons, poles or bars, kicks, punches and catapulted missiles that may be used against
officers in operational or training scenarios.The shoulder guard is held onto the wearer's
body armour by passing the 50mm elastic strap under the ballistic vest and back over the top
of the shoulder guard. The shoulder guard is then secured by feeding the elastic strap
through the plastic guide and onto the shoulder, fastening by Velcro. The upper arm is then
secured using the 30mm Elasticated strap.Shoulder & upper arm guards are in pairs. Yellow
Velcro on the upper arm strap signifies the right arm.
|
 |
D262 |
Standard Forearm & Elbow Guards
Deenside Level 2 Guards have been shown to resist displacement from limbs and torso to a
level beyond that required by BS 7971-4. They have been assessed for comfort when worn for
extended periods of time, ease of donning and any restriction to normal movement during
physical activity and have been shown to have an excellent ergonomic score for the
requirements of BS 7971-1.Forearm and elbow guards are in pairs. Yellow Velcro on the elbow
strap signifies the right arm. Each guard is secured with three Elasticated straps.
|
 |
D109 |
lightweight groin and box
The Lightweight groin guard has been specifically designed for male officers to give maximum
protection and comfort without restricting comfort.The groin guard is secured to the waist
with an elastic adjustable belt with Velcro TM fastening and elastic leg straps to ensure
the guard stays against the groin area.Inside the groin is a pocket for the box, which
allows for removal for cleaning or replacement.
|
 |
D263 |
Thigh Guard
Deenside Level 2 Guards have been shown to resist displacement from limbs and torso to a
level beyond that required by BS 7971-4. They have been assessed for comfort when worn for
extended periods of time, ease of donning and any restriction to normal movement during
physical activity and have been shown to have an excellent ergonomic score for the
requirements of BS 7971-1.Thigh guards are in pairs. Yellow Velcro on the thigh strap
signifies the right leg. Each guard is secured with two straps, one secures the guard to the
leg, the other feed around the wearer's belt and thus secures to the waist.
|
 |
D264 |
Shin / Knee Guard
Deenside Level 2 Guards have been shown to resist displacement from limbs and torso to a
level beyond that required by BS 7971-4. They have been assessed for comfort when worn for
extended periods of time, ease of donning and any restriction to normal movement during
physical activity and have been shown to have an excellent ergonomic score for the
requirements of BS 7971-1.Shin and knee guards are in pairs. Yellow Velcro on the knee guard
strap signifies the right leg. Each guard is secured by three Elasticated straps.NOTE: D2464
range is designed to be worn with D268 Metatarsal guard.
|
 |
D268 |
Metatarsal Guard
Deenside Guards have been shown to resist displacement from limbs and torso to a high level.
They have been assessed for comfort when worn for extended periods of time, ease of donning
and any restriction to normal movement during physical activity and have been shown to have
an excellent ergonomic score.Metatarsal guards are available in pairs, and are attached to
the footwear by passing the strap through the laces and securing with the Velcro fastener.
|
 |
D070 |
80ltr Equipment Bag
This kitbag holds an enormous amount of equipment and is suitable both to military and
police personnel.
The three methods of carrying the load - by hand, shoulder or using the rucksack straps
offers enough variation to ensure that this kitbag is the best solution for rapid
mobilisation.
|
|
D174 |
POLICE Bump Cap
Baseball cap design in black. 'POLICE' logo to front in white embroidered lettering measuring
100mm wide x 35mm high. 3 x rows of black/white chequered dicing to sides from edge of logo to
adjustment panel to be approx. 40mm in height from bottom seam of cap. Size adjustment panel to
rear offering full size range adjustment. Peak to be of firm construction and measuring approx.
700mm in length and 1700mm in width. Hard construction inside cap offering protection to EN:812
standard.
|
|
D175 |
POLICE Baseball Cap
Baseball cap design in black.'POLICE' logo to front in white embroidered lettering
measuring 100mm wide x 35mm high. 3 x rows of black/white chequered dicing to sides from
edge of logo to adjustment panel to be approx. 40mm in height from bottom seam of cap. Size
adjustment panel to rear offering full size range adjustment. Peak to be of firm
construction and measuring approx. 700mm in length and 1700mm in width.
|